Displaying seconds on the clock on Magellan eXplorist touch
Posted: Mon Apr 04, 2016 5:33 pm
The internal clock on the top of the screen of Magellan eXplorist touch models (510, 610, 710) can display only hours and minutes, but not a seconds.
Displaing a seconds may be useful for ajustment of external cameras, i.e. for mapping purpose for OSM.
Here is an additional software for displaing a seconds. It is based on "SystemInformation" soft by von Daniel Schumann and "MortScript" script language by Mirko a.k.a Mort (http://www.sto-helit.de)
How to install
1. Connect your GPS to PC as a storage device
2. Go to \APP\System folder and rename the file Process_Manager.exe to Process_Manager_original.exe
3. Unpack my archive and copy all files except "readme.txt" and "Test.exe" to \APP\System folder
4. Unmount and disconnect your GPS from PC
How to enable
1. Switch your GPS on and wait until it fully load it's sofware
2. Tap on screen and you will se the "4-corners-menu". Click on bottom left corner ("Main menu")
3. Click on "wrench and screwdriver" icon
4. Click on word "Tools" 3-4 times. You will see a hidden menu
5. Click on button "Process manager". You will see the small panel with seconds near the system clock.
How to disable
1. Double click on that small "seconds" panel or go to the hidden menu and click 'Process manager" button again
2. This feature will be disabled automatically every time you restart or swithing off your GPS
How to uninstall
1. Connect your GPS to PC as a storage device
2. Go to \APP\System folder and erase all files that you copied.
(back.bmp, MortScript.exe, Process_manager.exe, Process_Manager.mscr, SysInfo.exe, SisInfo.INI, SysInfoSettings.ini)
Do not erase any other files!
3. Rename Process_Manager_original.exe to Process_Manager.exe
4. Unmount and disconnect your GPS from PC
NOTE: This software will be erased after firmware update or firmware reinstallation. Do not worry. Just reinstall it if you need it.
Displaing a seconds may be useful for ajustment of external cameras, i.e. for mapping purpose for OSM.
Here is an additional software for displaing a seconds. It is based on "SystemInformation" soft by von Daniel Schumann and "MortScript" script language by Mirko a.k.a Mort (http://www.sto-helit.de)
How to install
1. Connect your GPS to PC as a storage device
2. Go to \APP\System folder and rename the file Process_Manager.exe to Process_Manager_original.exe
3. Unpack my archive and copy all files except "readme.txt" and "Test.exe" to \APP\System folder
4. Unmount and disconnect your GPS from PC
How to enable
1. Switch your GPS on and wait until it fully load it's sofware
2. Tap on screen and you will se the "4-corners-menu". Click on bottom left corner ("Main menu")
3. Click on "wrench and screwdriver" icon
4. Click on word "Tools" 3-4 times. You will see a hidden menu
5. Click on button "Process manager". You will see the small panel with seconds near the system clock.
How to disable
1. Double click on that small "seconds" panel or go to the hidden menu and click 'Process manager" button again
2. This feature will be disabled automatically every time you restart or swithing off your GPS
How to uninstall
1. Connect your GPS to PC as a storage device
2. Go to \APP\System folder and erase all files that you copied.
(back.bmp, MortScript.exe, Process_manager.exe, Process_Manager.mscr, SysInfo.exe, SisInfo.INI, SysInfoSettings.ini)
Do not erase any other files!
3. Rename Process_Manager_original.exe to Process_Manager.exe
4. Unmount and disconnect your GPS from PC
NOTE: This software will be erased after firmware update or firmware reinstallation. Do not worry. Just reinstall it if you need it.